On Thursday, December 29, 2022 at 11:53:10 AM UTC-5, K.S. Bhaskar wrote:
> (This e-mail is a summary of our blog post https://yottadb.com/happy-new-year-r1-36-released-new-gui/)
>
> We would like to send you our best wishes for a Happy New Year. We wish for you a happy 2023.
>
> We would like to announce the release of YottaDB r1.36, a major release.
>
> - On the x86_64 architecture, SUSE Enterprise 15.x is a Supported platform.
> - There is new functionality for diagnostics, troubleshooting, and forensics. Of note, the %YDBJNLF utility program facilitates analyzing the voluminous information in journal files, including using SQL.
> - There are enhancements to make programming easier.
> - r1.36 also inherits enhancements and fixes from GT.M V6.3-012, V6.3-013, and V6.3-014 that are publicly available under a free/open source software license.
>
> Please plan to upgrade your existing YottaDB installations to r1.36. We are confident that r1.36 will meet or exceed the quality you have come to expect of us.
>
> We also have a brand new GUI console that is ready for you to beta test. An important feature is that all files, including JavaScript files, are versioned, and specific versions are served statically from the GUI installation, yielding better security and software stability over the long term. To use the GUI, please follow the instructions at https://gitlab.com/YottaDB/UI/YDBGUI to install and start it. Also please give us feedback.
>
> A Docker image with the current master branches of YottaDB, Octo, and the GUI packaged with a version of the VistA electronic health record software with dummy patients allows you to try our latest software, as we update it regularly. You can use it by running docker run -d -p 2222:22 -p 1338:1338 -p 8089:8089 -p 9430:9430 --name=octo-vehu download.yottadb.com/yottadb/octo-vehu:latest-master
>
> In addition to saying Happy New Year, we also say Happy New Software. Please stay in touch and let us know if you would like us to mail you a cap (details at https://yottadb.net/where-are-the-users/).
>
> Regards
> – Bhaskar
>
> --
> YottaDB - Rock solid. Lightning fast. Secure. Pick any three.
I'm attempting to install the GUI on a fresh 1.36 installation, but I'm getting this error on the cmake command:

marksires@weblab:/tmp/YDBGUI/build$ cmake .. && make && sudo make install

-- YDBCMake Source Directory: /tmp/YDBGUI/build/_deps/ydbcmake-src
CMake Error at build/_deps/ydbcmake-src/ydbcmake/CMakeDetermineMCompiler.cmake:72 (message):
Unable to find 'pkg-config'. Set PKGCONFIG in CMake cache.
Call Stack (most recent call first):
build/_deps/mwebserver-src/CMakeLists.txt:31 (project)

CMake Error: CMAKE_M_COMPILER not set, after EnableLanguage
-- Configuring incomplete, errors occurred!
See also "/tmp/YDBGUI/build/CMakeFiles/CMakeOutput.log".

marksires@weblab:/tmp/YDBGUI/build$

It's likely something simple, but I seldom do this, and have probably forgotten something basic.

Mark

On Friday, March 24, 2023 at 12:00:02 PM UTC-4, OldMster wrote:
> On Thursday, December 29, 2022 at 11:53:10 AM UTC-5, K.S. Bhaskar wrote:
> > (This e-mail is a summary of our blog post https://yottadb.com/happy-new-year-r1-36-released-new-gui/)
> >
> > We would like to send you our best wishes for a Happy New Year. We wish for you a happy 2023.
> >
> > We would like to announce the release of YottaDB r1.36, a major release..
> >
> > - On the x86_64 architecture, SUSE Enterprise 15.x is a Supported platform.
> > - There is new functionality for diagnostics, troubleshooting, and forensics. Of note, the %YDBJNLF utility program facilitates analyzing the voluminous information in journal files, including using SQL.
> > - There are enhancements to make programming easier.
> > - r1.36 also inherits enhancements and fixes from GT.M V6.3-012, V6.3-013, and V6.3-014 that are publicly available under a free/open source software license.
> >
> > Please plan to upgrade your existing YottaDB installations to r1.36. We are confident that r1.36 will meet or exceed the quality you have come to expect of us.
> >
> > We also have a brand new GUI console that is ready for you to beta test.. An important feature is that all files, including JavaScript files, are versioned, and specific versions are served statically from the GUI installation, yielding better security and software stability over the long term. To use the GUI, please follow the instructions at https://gitlab.com/YottaDB/UI/YDBGUI to install and start it. Also please give us feedback.
> >
> > A Docker image with the current master branches of YottaDB, Octo, and the GUI packaged with a version of the VistA electronic health record software with dummy patients allows you to try our latest software, as we update it regularly. You can use it by running docker run -d -p 2222:22 -p 1338:1338 -p 8089:8089 -p 9430:9430 --name=octo-vehu download.yottadb.com/yottadb/octo-vehu:latest-master
> >
> > In addition to saying Happy New Year, we also say Happy New Software. Please stay in touch and let us know if you would like us to mail you a cap (details at https://yottadb.net/where-are-the-users/).
> >
> > Regards
> > – Bhaskar
> >
> > --
> > YottaDB - Rock solid. Lightning fast. Secure. Pick any three.
> I'm attempting to install the GUI on a fresh 1.36 installation, but I'm getting this error on the cmake command:
>
> marksires@weblab:/tmp/YDBGUI/build$ cmake .. && make && sudo make install
>
> -- YDBCMake Source Directory: /tmp/YDBGUI/build/_deps/ydbcmake-src
> CMake Error at build/_deps/ydbcmake-src/ydbcmake/CMakeDetermineMCompiler.cmake:72 (message):
> Unable to find 'pkg-config'. Set PKGCONFIG in CMake cache.
> Call Stack (most recent call first):
> build/_deps/mwebserver-src/CMakeLists.txt:31 (project)
>
>
> CMake Error: CMAKE_M_COMPILER not set, after EnableLanguage
> -- Configuring incomplete, errors occurred!
> See also "/tmp/YDBGUI/build/CMakeFiles/CMakeOutput.log".
>
> marksires@weblab:/tmp/YDBGUI/build$
>
> It's likely something simple, but I seldom do this, and have probably forgotten something basic.
>
> Mark

Mark –

Do you have pkg-config installed (sudo apt install pkg-config on Debian/Ubuntu systems)?

Regards
– Bhaskar

On Friday, March 24, 2023 at 1:01:54 PM UTC-4, K.S. Bhaskar wrote:
> On Friday, March 24, 2023 at 12:00:02 PM UTC-4, OldMster wrote:
> > On Thursday, December 29, 2022 at 11:53:10 AM UTC-5, K.S. Bhaskar wrote:
> > > (This e-mail is a summary of our blog post https://yottadb.com/happy-new-year-r1-36-released-new-gui/)
> > >
> > > We would like to send you our best wishes for a Happy New Year. We wish for you a happy 2023.
> > >
> > > We would like to announce the release of YottaDB r1.36, a major release.
> > >
> > > - On the x86_64 architecture, SUSE Enterprise 15.x is a Supported platform.
> > > - There is new functionality for diagnostics, troubleshooting, and forensics. Of note, the %YDBJNLF utility program facilitates analyzing the voluminous information in journal files, including using SQL.
> > > - There are enhancements to make programming easier.
> > > - r1.36 also inherits enhancements and fixes from GT.M V6.3-012, V6.3-013, and V6.3-014 that are publicly available under a free/open source software license.
> > >
> > > Please plan to upgrade your existing YottaDB installations to r1.36. We are confident that r1.36 will meet or exceed the quality you have come to expect of us.
> > >
> > > We also have a brand new GUI console that is ready for you to beta test. An important feature is that all files, including JavaScript files, are versioned, and specific versions are served statically from the GUI installation, yielding better security and software stability over the long term. To use the GUI, please follow the instructions at https://gitlab.com/YottaDB/UI/YDBGUI to install and start it. Also please give us feedback.
> > >
> > > A Docker image with the current master branches of YottaDB, Octo, and the GUI packaged with a version of the VistA electronic health record software with dummy patients allows you to try our latest software, as we update it regularly. You can use it by running docker run -d -p 2222:22 -p 1338:1338 -p 8089:8089 -p 9430:9430 --name=octo-vehu download.yottadb.com/yottadb/octo-vehu:latest-master
> > >
> > > In addition to saying Happy New Year, we also say Happy New Software. Please stay in touch and let us know if you would like us to mail you a cap (details at https://yottadb.net/where-are-the-users/).
> > >
> > > Regards
> > > – Bhaskar
> > >
> > > --
> > > YottaDB - Rock solid. Lightning fast. Secure. Pick any three.
> > I'm attempting to install the GUI on a fresh 1.36 installation, but I'm getting this error on the cmake command:
> >
> > marksires@weblab:/tmp/YDBGUI/build$ cmake .. && make && sudo make install
> >
> > -- YDBCMake Source Directory: /tmp/YDBGUI/build/_deps/ydbcmake-src
> > CMake Error at build/_deps/ydbcmake-src/ydbcmake/CMakeDetermineMCompiler.cmake:72 (message):
> > Unable to find 'pkg-config'. Set PKGCONFIG in CMake cache.
> > Call Stack (most recent call first):
> > build/_deps/mwebserver-src/CMakeLists.txt:31 (project)
> >
> >
> > CMake Error: CMAKE_M_COMPILER not set, after EnableLanguage
> > -- Configuring incomplete, errors occurred!
> > See also "/tmp/YDBGUI/build/CMakeFiles/CMakeOutput.log".
> >
> > marksires@weblab:/tmp/YDBGUI/build$
> >
> > It's likely something simple, but I seldom do this, and have probably forgotten something basic.
> >
> > Mark
> Mark –
>
> Do you have pkg-config installed (sudo apt install pkg-config on Debian/Ubuntu systems)?
>
> Regards
> – Bhaskar

Also "sudo ydbinstall.sh --ovewrite-existing --gui --plugins-only" might do the entire job for you. Use the --installdir option if YottaDB is not installed in the default location. Use --help if you need it.

Regards
– Bhaskar

On Friday, March 24, 2023 at 1:01:54 PM UTC-4, K.S. Bhaskar wrote:
> On Friday, March 24, 2023 at 12:00:02 PM UTC-4, OldMster wrote:
> > On Thursday, December 29, 2022 at 11:53:10 AM UTC-5, K.S. Bhaskar wrote:
> > > (This e-mail is a summary of our blog post https://yottadb.com/happy-new-year-r1-36-released-new-gui/)
> > >
> > > We would like to send you our best wishes for a Happy New Year. We wish for you a happy 2023.
> > >
> > > We would like to announce the release of YottaDB r1.36, a major release.
> > >
> > > - On the x86_64 architecture, SUSE Enterprise 15.x is a Supported platform.
> > > - There is new functionality for diagnostics, troubleshooting, and forensics. Of note, the %YDBJNLF utility program facilitates analyzing the voluminous information in journal files, including using SQL.
> > > - There are enhancements to make programming easier.
> > > - r1.36 also inherits enhancements and fixes from GT.M V6.3-012, V6.3-013, and V6.3-014 that are publicly available under a free/open source software license.
> > >
> > > Please plan to upgrade your existing YottaDB installations to r1.36. We are confident that r1.36 will meet or exceed the quality you have come to expect of us.
> > >
> > > We also have a brand new GUI console that is ready for you to beta test. An important feature is that all files, including JavaScript files, are versioned, and specific versions are served statically from the GUI installation, yielding better security and software stability over the long term. To use the GUI, please follow the instructions at https://gitlab.com/YottaDB/UI/YDBGUI to install and start it. Also please give us feedback.
> > >
> > > A Docker image with the current master branches of YottaDB, Octo, and the GUI packaged with a version of the VistA electronic health record software with dummy patients allows you to try our latest software, as we update it regularly. You can use it by running docker run -d -p 2222:22 -p 1338:1338 -p 8089:8089 -p 9430:9430 --name=octo-vehu download.yottadb.com/yottadb/octo-vehu:latest-master
> > >
> > > In addition to saying Happy New Year, we also say Happy New Software. Please stay in touch and let us know if you would like us to mail you a cap (details at https://yottadb.net/where-are-the-users/).
> > >
> > > Regards
> > > – Bhaskar
> > >
> > > --
> > > YottaDB - Rock solid. Lightning fast. Secure. Pick any three.
> > I'm attempting to install the GUI on a fresh 1.36 installation, but I'm getting this error on the cmake command:
> >
> > marksires@weblab:/tmp/YDBGUI/build$ cmake .. && make && sudo make install
> >
> > -- YDBCMake Source Directory: /tmp/YDBGUI/build/_deps/ydbcmake-src
> > CMake Error at build/_deps/ydbcmake-src/ydbcmake/CMakeDetermineMCompiler.cmake:72 (message):
> > Unable to find 'pkg-config'. Set PKGCONFIG in CMake cache.
> > Call Stack (most recent call first):
> > build/_deps/mwebserver-src/CMakeLists.txt:31 (project)
> >
> >
> > CMake Error: CMAKE_M_COMPILER not set, after EnableLanguage
> > -- Configuring incomplete, errors occurred!
> > See also "/tmp/YDBGUI/build/CMakeFiles/CMakeOutput.log".
> >
> > marksires@weblab:/tmp/YDBGUI/build$
> >
> > It's likely something simple, but I seldom do this, and have probably forgotten something basic.
> >
> > Mark
> Mark –
>
> Do you have pkg-config installed (sudo apt install pkg-config on Debian/Ubuntu systems)?
>
> Regards
> – Bhaskar
Nope, see, I knew it was something basic I didn't know. Worked fine after installing this.

Mark