Attempting to install Synchronet on a fresh windows 10 64 bit system

The link provided to download the MSVCR100.DL is no longer available from Microsoft.

I did install the visual c+ 2015 vcruntime.dll

When I ran setup I received the following message
The applicaion was unable to start correctly(0Xc000007b)

Any suggestions would be appreciated.

--- WinPoint 415.0
* Origin: Original *WinPoint* Origin (1:153/7715.26)
■ Synchronet ■ Vertrauen ■ Home of Synchronet ■ [vert/cvs/bbs].synchro.net

Re: Installation Fails
By: Thom LaCosta-BSM to All on Sat Apr 22 2023 07:38 pm

> Attempting to install Synchronet on a fresh windows 10 64 bit system
>
> The link provided to download the MSVCR100.DL is no longer available from
> Microsoft.
>
> I did install the visual c+ 2015 vcruntime.dll
>
> When I ran setup I received the following message

you're on the internet so you can find this file someplace.
i have 29 copies of this file on my system.
you probably have atleast 1, or you can download it from a website.
---
■ Synchronet ■ ::: BBSES.info - free BBS services :::

Re: Installation Fails
By: Thom LaCosta-BSM to All on Sat Apr 22 2023 07:38 pm

> Attempting to install Synchronet on a fresh windows 10 64 bit system
>
> The link provided to download the MSVCR100.DL is no longer available from
> Microsoft.

Looks like it's available to me. The link provided at wiki.synchro.net/install:win still works. I just downloaded vcredist_x64.exe.

> I did install the visual c+ 2015 vcruntime.dll
>
> When I ran setup I received the following message
> The applicaion was unable to start correctly(0Xc000007b)

Is there more to that error message?
--
digital man (rob)

Sling Blade quote #17:
Charles Bushman: A shovel just makes too goddamned much racket.
Norco, CA WX: 73.2°F, 44.0% humidity, 4 mph E wind, 0.00 inches rain/24hrs
---
■ Synchronet ■ Vertrauen ■ Home of Synchronet ■ [vert/cvs/bbs].synchro.net

Re: Installation Fails
By: Thom LaCosta-BSM to All on Sat Apr 22 2023 07:38 pm

> Attempting to install Synchronet on a fresh windows 10 64 bit system
> The link provided to download the MSVCR100.DL is no longer available from
> Microsoft.
>
> I did install the visual c+ 2015 vcruntime.dll
>
> When I ran setup I received the following message
> The applicaion was unable to start correctly(0Xc000007b)
>
> Any suggestions would be appreciated.
I also just installed synchronet on a fresh windows 10 64 bit system. I had the same problem as your having. I put the two files it wanted into windows/system32 and broke windows beyond repair. So I reformatted and began again. This time, after getting windows back on, I went to the wiki site and installed synchronet from there. I had no problems after that. Synchronet went right on and even helped me allow it through my firewall. I also had no errors. My website is up and running this time (wasn't working on windows 7 system). I hope this was helpful.

---
■ Synchronet ■ trapper - trapdoor.synchro.net

Re: Installation Fails
By: Trapper to Thom LaCosta-BSM on Sun Apr 23 2023 10:23 am

> I also just installed synchronet on a fresh windows 10 64 bit system. I had
> the same problem as your having. I put the two files it wanted into
> windows/system32 and broke windows beyond repair. So I reformatted and began
> again. This time, after getting windows back on, I went to the wiki site and
> installed synchronet from there. I had no problems after that. Synchronet
> went right on and even helped me allow it through my firewall. I also had no
> errors. My website is up and running this time (wasn't working on windows 7
> system). I hope this was helpful.

i think you have hardware or some other issues. it shouldn't break windows beyond repair. did you choose to overwrite files?
---
■ Synchronet ■ ::: BBSES.info - free BBS services :::

-=> Trapper wrote to Thom LaCosta-BSM <=-

> Attempting to install Synchronet on a fresh windows 10 64 bit system
> The link provided to download the MSVCR100.DL is no longer available from
> Microsoft.
>
> I did install the visual c+ 2015 vcruntime.dll
>
> When I ran setup I received the following message
> The applicaion was unable to start correctly(0Xc000007b)

Tr> I also just installed synchronet on a fresh windows 10 64 bit
Tr> system. I had the same problem as your having. I put the two
Tr> files it wanted into windows/system32 and broke windows beyond
Tr> repair. So I reformatted and began again. This time, after
Tr> getting windows back on, I went to the wiki site and installed
Tr> synchronet from there. I had no problems after that. Synchronet
Tr> went right on and even helped me allow it through my firewall. I
Tr> also had no errors. My website is up and running this time
Tr> (wasn't working on windows 7 system). I hope this was helpful.

This doesnt' even make any sense. "Broke windows beyond repair" by
placing two files in ../system32? Also, what does it mean when you say
you installed synchronet from the wiki site? Doesn't make sense.

.... Internal Error: The system has been taken over by sheep at line 19960
--- MultiMail/Linux v0.52
� Synchronet � Palantir BBS * palantirbbs.ddns.net * Pensacola, FL

//Hello Trapper,//

This time, after getting windows back on, I went to the wiki
T> site and installed synchronet from there. I had no problems after that.
T> Synchronet went right on and even helped me allow it through my firewall.
T> I also had no errors. My website is up and running this time (wasn't
T> working on windows 7 system). I hope this was helpful.

So, you did not get an error message about missing files?
What was the URL you used to get synchronet.

It's all kind of mysterioius, as the windows 10 I installed was from the create mkedia by Microsoft...and I did not try the install untill windows was updated.

Regards,
Thom LaCosta
--- WinPoint 415.0
* Origin: Another Random *WinPoint* Origin! (1:153/7715.25)
■ Synchronet ■ Vertrauen ■ Home of Synchronet ■ [vert/cvs/bbs].synchro.net

Re: Installation Fails
By: MRO to Trapper on Sun Apr 23 2023 04:57 pm

No, it did not ask to overwrite, but I think it did. I now realize the two files were off the upgrade of windows and not from the actual win 10 pro. Rooky move I know. No big deal though it was a fresh install on a new drive. after a quick reformat and new install its running great.

---
■ Synchronet ■ trapper - trapdoor.synchro.net

Re: Re: Installation Fails
By: Gamgee to Trapper on Sun Apr 23 2023 05:17 pm

I went to wiki.synchro.net. I clicked on install from the left column and then windows install. I then installed the two prerequisite files. Then I installed the offical release, though now I realize that it may have downloaded and installed from my computer. There was a lot going on and I didn't remember that part. The older I get the less I remember, and the less patience I have, making me make more mistakes.

---
■ Synchronet ■ trapper - trapdoor.synchro.net

Re: Re: Installation Fails
By: Thom LaCosta to Trapper on Sun Apr 23 2023 08:35 pm

> //Hello Trapper,//
I installed synchronet from wiki.synchro.net. And windows I have on a thumbdrive obtained from microsoft. It is all running correctly now that I did things correctly. I am usually pretty good with compuetrs, but I have my moments of stupidity.

---
■ Synchronet ■ trapper - trapdoor.synchro.net

Re: Installation Fails
By: Trapper to MRO on Mon Apr 24 2023 08:40 am

> Re: Installation Fails
> By: MRO to Trapper on Sun Apr 23 2023 04:57 pm
>
> No, it did not ask to overwrite, but I think it did. I now realize the two
> files were off the upgrade of windows and not from the actual win 10 pro.
> Rooky move I know. No big deal though it was a fresh install on a new
> drive. after a quick reformat and new install its running great.

It wont overwrite without you saying yes. and if the .dll is loaded, you won't be able to overwrite at all.
---
■ Synchronet ■ ::: BBSES.info - free BBS services :::

Re: Installation Fails
By: MRO to Trapper on Mon Apr 24 2023 03:14 pm

I know, it suprised me as well. I was waiting for the confirmation but nothing happened. I rebooted and it would not come back up. I have a windows repair thumb drive. It went through its routines but when it rebooted it was still broken. I did not spend too much time on it just because it was a new install and I was loosing nothing by formatting and reinstalling. I suppose I should have taken the time to figure out what was going on for future refrence.

---
■ Synchronet ■ trapper - trapdoor.synchro.net

-=> Trapper wrote to MRO <=-

Tr> Re: Installation Fails
Tr> By: MRO to Trapper on Mon Apr 24 2023 03:14 pm

Tr> I know, it suprised me as well. I was waiting for the
Tr> confirmation but nothing happened. I rebooted and it would not
Tr> come back up. I have a windows repair thumb drive. It went
Tr> through its routines but when it rebooted it was still broken. I
Tr> did not spend too much time on it just because it was a new
Tr> install and I was loosing nothing by formatting and reinstalling.
Tr> I suppose I should have taken the time to figure out what was
Tr> going on for future refrence.

Do you think you could try quoting some of the message that you are
replying to, to provide context/reference? Otherwise it's quite
difficult to follow the conversation...

.... He does the work of 3 Men...Moe, Larry & Curly
--- MultiMail/Linux v0.52
� Synchronet � Palantir BBS * palantirbbs.ddns.net * Pensacola, FL

Re: Re: Installation Fails
By: Gamgee to Trapper on Tue Apr 25 2023 10:33 am

You asked me to quote some of the message I am responding to because it is hard to follow the conversation. Sure, I can do that. I didn't realize some of the conversation goes away because I was hitting CTRL A to respond. I just assumed the entire conversation was there I guess. From now On I will do that.

---
■ Synchronet ■ trapper - trapdoor.synchro.net

-=> Trapper wrote to Gamgee <=-

Tr> Re: Re: Installation Fails
Tr> By: Gamgee to Trapper on Tue Apr 25 2023 10:33 am

Tr> You asked me to quote some of the message I am responding to
Tr> because it is hard to follow the conversation. Sure, I can do
Tr> that.

But.... you didn't here. I guess you mean on your next reply. :-)

Tr> I didn't realize some of the conversation goes away because
Tr> I was hitting CTRL A to respond. I just assumed the entire
Tr> conversation was there I guess.

Ahhh, if you're hitting Ctrl-A to *select* the previous message's text,
you then have to hit Ctrl-M to *paste* it into your reply, and then
you'll be able to type stuff below it.

Tr> From now On I will do that.

That would be good, and appreciated by everyone. Thanks.

.... All the easy problems have been solved.
--- MultiMail/Linux v0.52
� Synchronet � Palantir BBS * palantirbbs.ddns.net * Pensacola, FL

Re: Re: Installation Fails
By: Trapper to Gamgee on Tue Apr 25 2023 08:48 pm

Tr> You asked me to quote some of the message I am responding to because it is
Tr> hard to follow the conversation. Sure, I can do that. I didn't realize
Tr> some of the conversation goes away because I was hitting CTRL A to
Tr> respond. I just assumed the entire conversation was there I guess. From
Tr> now On I will do that.

No, normally the entire conversation doesn't appear when reading messages (except perhaps if you're using a web-based threaded viewer where past posts are visible and you can scroll through them). Messages normally appear one at a time.

Nightfox

---
■ Synchronet ■ Digital Distortion: digitaldistortionbbs.com

Re: Re: Installation Fails
By: Gamgee to Trapper on Wed Apr 26 2023 08:14 am

> -=> Trapper wrote to Gamgee <=-
>
> Tr> Re: Re: Installation Fails
> Tr> By: Gamgee to Trapper on Tue Apr 25 2023 10:33 am
>
> Tr> You asked me to quote some of the message I am responding to
> Tr> because it is hard to follow the conversation. Sure, I can do
> Tr> that.
>
> But.... you didn't here. I guess you mean on your next reply. :-)
>
> Tr> I didn't realize some of the conversation goes away because
> Tr> I was hitting CTRL A to respond. I just assumed the entire
> Tr> conversation was there I guess.
>
> Ahhh, if you're hitting Ctrl-A to *select* the previous message's text,
> you then have to hit Ctrl-M to *paste* it into your reply, and then
> you'll be able to type stuff below it.
>
> Tr> From now On I will do that.
>
> That would be good, and appreciated by everyone. Thanks.
>
>
> ... All the easy problems have been solved.

Thanks for the tip, it's been a very long time since i engauged in conversations on here. It's been 25 years or so and I don't remember coping and pasting. I tried it here, I hoped it worked.

---
■ Synchronet ■ trapper - trapdoor.synchro.net

From Newsgroup: alt.bbs.synchronet

On Thu, 27 Apr 2023 05:55:38 -0400
"Trapper" <trapper@TRAPDOOR.remove-bck-this> wrote:

> To: Gamgee
> Re: Re: Installation Fails
> By: Gamgee to Trapper on Wed Apr 26 2023 08:14 am
>
> > -=> Trapper wrote to Gamgee <=-
> >
> > Tr> Re: Re: Installation Fails
> > Tr> By: Gamgee to Trapper on Tue Apr 25 2023 10:33 am
> >
> > Tr> You asked me to quote some of the message I am responding to
> > Tr> because it is hard to follow the conversation. Sure, I can do
> > Tr> that.
> >
> > But.... you didn't here. I guess you mean on your next reply. :-)
> >
> > Tr> I didn't realize some of the conversation goes away because
> > Tr> I was hitting CTRL A to respond. I just assumed the entire
> > Tr> conversation was there I guess.
> >
> > Ahhh, if you're hitting Ctrl-A to *select* the previous message's
> > text, you then have to hit Ctrl-M to *paste* it into your reply,
> > and then you'll be able to type stuff below it.
> >
> > Tr> From now On I will do that.
> >
> > That would be good, and appreciated by everyone. Thanks.
> >
> >
> > ... All the easy problems have been solved.
>
> Thanks for the tip, it's been a very long time since i engauged in
> conversations on here. It's been 25 years or so and I don't remember
> coping and pasting. I tried it here, I hoped it worked.

These days some use the word, 'copypasta' to save syllables.

25 years is a long time to drop off the wire. I vaguely remember
computers at the library linked up to gopher, WAIS, and BBS.

Welcome back to the Internuts.

SugarBug | https://sybershock.com

--- Synchronet 3.20a-Linux NewsLink 1.114
� Synchronet � Vertrauen � Home of Synchronet � [vert/cvs/bbs].synchro.net

Re: Re: Installation Fails
By: Syber Shock to alt.bbs.synchronet on Thu Apr 27 2023 09:30 am

> From Newsgroup: alt.bbs.synchronet
>
> On Thu, 27 Apr 2023 05:55:38 -0400
> "Trapper" <trapper@TRAPDOOR.remove-bck-this> wrote:
>
> > To: Gamgee
> > Re: Re: Installation Fails
> > By: Gamgee to Trapper on Wed Apr 26 2023 08:14 am
>
> > > -=> Trapper wrote to Gamgee <=-
>
> > > Tr> Re: Re: Installation Fails
> > > Tr> By: Gamgee to Trapper on Tue Apr 25 2023 10:33 am
>
> > > Tr> You asked me to quote some of the message I am responding to
> > > Tr> because it is hard to follow the conversation. Sure, I can do
> > > Tr> that.
>
> > > But.... you didn't here. I guess you mean on your next reply. :-)
>
> > > Tr> I didn't realize some of the conversation goes away because
> > > Tr> I was hitting CTRL A to respond. I just assumed the entire
> > > Tr> conversation was there I guess.
>
> > > Ahhh, if you're hitting Ctrl-A to *select* the previous message's
> > > text, you then have to hit Ctrl-M to *paste* it into your reply,
> > > and then you'll be able to type stuff below it.
>
> > > Tr> From now On I will do that.
>
> > > That would be good, and appreciated by everyone. Thanks.
>
>
> > > ... All the easy problems have been solved.
>
> > Thanks for the tip, it's been a very long time since i engauged in
> > conversations on here. It's been 25 years or so and I don't remember
> > coping and pasting. I tried it here, I hoped it worked.
>
> These days some use the word, 'copypasta' to save syllables.
>
> 25 years is a long time to drop off the wire. I vaguely remember
> computers at the library linked up to gopher, WAIS, and BBS.
>
> Welcome back to the Internuts.
>
> SugarBug | https://sybershock.com

Yes, when you say it out loud 25 years is a long time, but when you get
married, have kids, have two jobs, buy a house, go to college, then life moves along quickly. It really didn't seem that long at all.
However, it is nice to be back with the Internuts, i missed it here.

---
■ Synchronet ■ trapper - trapdoor.synchro.net