Message-ID:

Please don't recommend me to your friends-- it's difficult enough to cope with you alone.

dovenet / Pro-Audio / Church Sound Board Pickin

Church Sound Board Pickin

<60989520.1179.dove-proaudio@3corners.us>

https://www.rocksolidbbs.com/dovenet/article-flat.php?id=83&group=DOVE-Net.Pro-Audio#83

copy link Newsgroups: DOVE-Net.Pro-Audio

From: hatton@VERT/THRCORN (Hatton)
To: ALL
Subject: Church Sound Board Pickin
Message-ID: <60989520.1179.dove-proaudio@3corners.us>
Date: Sun, 9 May 2021 19:06:24 -0500
X-Comment-To: ALL
Path: rocksolidbbs.com!not-for-mail
Organization: 3 Corners
Newsgroups: DOVE-Net.Pro-Audio
In-Reply-To: <603E7967.18257.dove-aud@vert.synchro.net>
References: <603E7967.18257.dove-aud@vert.synchro.net>
X-FTN-PID: Synchronet 3.18c-Linux master/0e82baed8 Feb 21 2021 GCC 9.3.0
X-FTN-CHRS: CP437 2
WhenImported: 20210509191443-0700 c1e0
WhenExported: 20210509203827-0700 c1e0
ExportedFrom: VERT dove-aud 18268
WhenImported: 20210510020624-0500 412c
WhenExported: 20210510021441Z 412c
ExportedFrom: THRCORN dove-proaudio 1179
Content-Type: text/plain; charset=IBM437
Content-Transfer-Encoding: 8bit

by: Hatton - Mon, 10 May 2021 00:06 UTC

Re: Church Sound Board Pickin
By: JIMMY ANDERSON to HATTON on Tue Mar 02 2021 10:55 am

>> Hatton> Does anyone have any suggestions or ideas on filtering out
>> the signal?

HA>> DM / Rampage: I know the runs are XLR cables but am unsure beyond
HA>> that; I'll have to do some more research. Definitely worth digging
HA>> up a floor plate and pulling the plug off the board to check.

JA> Let us know how it goes! Now we're all invested. :-)

Picking this thread back up as I was finally able to get into the building and do some testing.

Note, this is just for the "worst offender" line. I believe I've isolated the issue to somewhere in the line between the microphone and the XLR jack. I finally got to where the jack is and unplugged the mic and there is no excess audio.

Looking at the line, it's super thin and there's a section where the rubber/sheath is gone so the ground wire looks exposed. It was also coiled up and zip-tied. Spreading the cable out made no change so now I'm going to need to go back and test with the ferite.

At least I don't have to go chase the wire from the box to the board... at least I hope I don't.

Hatton

.... Advertising is the rattling of a stick inside a swill bucket.

---
■ Synchronet ■ Three Corners and Beyond! http://3corners.us