Hello g00r00!

Cryptlib again :-(

With Ubuntu 22.04 LTS "Linux apu4 5.15.0-40-generic #43-Ubuntu SMP Wed Jun 15
12:54:21 UTC 2022 x86_64 x86_64 GNU/Linux" it is no longer possible to take
Cryptolib 345, as it can no longer be compiled. I am therefore forced to use
Cryptolib 346, which can be compiled. However, Mystic BBS 1.12A47 and 1.12A48
do not run with it, the following error message always appears when connecting.

20:51:35 SSH > Connect on slot 1/5 (172.16.178.141)
20:51:35 SSH 1-HostName Alishas-MacBook-Pro.fritz.box
20:51:35 SSH 1-Negotiating SSH session
20:51:35 SSH Unable to set key (-2 )
20:51:35 SSH 1-Session failed

The ssl.cert file exists and has also been regenerated by Mystic
-rw------- 1 mystic mystic 2111 Jul 12 20:50 /mystic/data/ssl.cert

Could you please look at this and possibly fix it in the next version of
MysticBBS 1.12A48?

Greetings and thanks

Alisha

AS> With Ubuntu 22.04 LTS "Linux apu4 5.15.0-40-generic #43-Ubuntu SMP Wed
AS> Jun 15 12:54:21 UTC 2022 x86_64 x86_64 GNU/Linux" it is no longer
AS> possible to take Cryptolib 345, as it can no longer be compiled. I am

I believe it can you just have to change an old removed command line they have
in the Makefile.

But you can also download a precompiled one and try that here:

www.mysticbbs.com/downloads/cryptlib/

From the intel_linux64 directory copy libcl.so into your /usr/lib directory and
delete ssl.cert if you have one in data folder.

.... Redundant book title: DOS For Dummies

Hello g00r00!

Replying to a msg dated 12 Jul 22 18:49, from you to me.

The precompiled binary does not work, but I found the solution how to use the
Cryptolib 3.4.5 under Ubuntu 22.04 and that SSL runs. Attached is the solution
how I did it and it worked.

sudo apt-get update
sudo apt-get install build-essential
sudo apt-get install gcc-9 g++-9
sudo apt-get install zip unzip
sudo update-alternatives --install /usr/bin/gcc gcc /usr/bin/gcc-9 9
sudo update-alternatives --install /usr/bin/g++ g++ /usr/bin/g++-9 9
wget http://www.mysticbbs.com/downloads/cl345.zip
mkdir cl345
cd cl345
unzip -ax ../cl345.zip
sudo make shared
sudo mv libcl.so.3.4.5 /usr/lib/libcl.so
sudo rm /mystic/data/ssl.cert
sudo update-alternatives --install /usr/bin/gcc gcc /usr/bin/gcc-11 11
sudo update-alternatives --install /usr/bin/g++ g++ /usr/bin/g++-11 11
reboot the system

21:39:56 SSH > Connect on slot 1/5 (172.16.178.146)
21:39:56 SSH 1-HostName Alishas-MacBook-Pro.fritz.box
21:39:56 SSH 1-Negotiating SSH session
21:40:03 SSH 1-Creating terminal process
21:40:17 SSH 1-Closing terminal process (5)

best regards

Alisha

AS> The precompiled binary does not work, but I found the solution how to
AS> use the Cryptolib 3.4.5 under Ubuntu 22.04 and that SSL runs. Attached
AS> is the solution how I did it and it worked.

Thanks for letting me know. Its odd because I downloaded a fresh 22.04 Ubuntu
and tried the precompiled binary which worked for me. I'll have to try it
again later and see if I can figure out whats going on there..

AS> sudo apt-get install gcc-9 g++-9

Yep this is what will do it. The change from gcc 9 to 11 is what broke the
Makefile for 3.4.5. For some reason Cryptlib Makefile uses some compiler
options that I believe were "depreciated" about a decade ago and were finally
removed entirely in 11.

I'll try to update the Wiki with a note about this!

.... Old musicians never die. They just decompose!

Hello, i tried with your precompiled libcl.so but mis server don't start with
tis log:
--------------------- Mystic v1.12 A47 2021/12/24 Mon, Jul 25 2022 (loglevel
1)
+ 25.07.2022 00:26:20 MANAGER Starting event system
+ 25.07.2022 00:26:20 MANAGER Starting 3 server(s)
+ 25.07.2022 00:26:20 MANAGER Starting servers in DAEMON mode
+ 25.07.2022 00:26:20 HTTP Using Webroot: /home/nikoh/mystic/webroot/
+ 25.07.2022 00:26:20 HTTP Listening on IPV4 port 80 using interface "0.0.0.0"
+ 25.07.2022 00:26:20 HTTP Listening on IPV6 port 80 using interface "::"
+ 25.07.2022 00:26:20 BINKP Listening on IPV4 port 24554 using interface
"0.0.0.0"
+ 25.07.2022 00:26:20 BINKP Listening on IPV6 port 24554 using interface "::"
+ 25.07.2022 00:26:20 TELNET Listening on IPV4 port 2323 using interface
"0.0.0.0"
+ 25.07.2022 00:26:20 TELNET Listening on IPV6 port 2323 using interface "::"
+ 25.07.2022 00:26:21 MANAGER Cryptlib not detected; SSL/SSH capabilities
disabled
+ 25.07.2022 00:26:21 EVENT Starting 3 event(s)
+ 25.07.2022 00:26:48 MANAGER Received shutdown event
+ 25.07.2022 00:26:48 MANAGER Shutdown: EVENT
+ 25.07.2022 00:26:48 MANAGER Shutdown: TELNET
+ 25.07.2022 00:26:48 MANAGER Shutdown: BINKP
+ 25.07.2022 00:26:48 MANAGER Shutdown: HTTP
+ 25.07.2022 00:26:48 MANAGER Waiting for servers to stop (up to 30 seconds)
+ 25.07.2022 00:26:48 EVENT Event system stopped
+ 25.07.2022 00:26:48 MANAGER Shutdown complete

AS> wget http://www.mysticbbs.com/downloads/cl345.zip
AS> mkdir cl345
AS> cd cl345
AS> unzip -ax ../cl345.zip
AS> sudo make shared
AS> sudo mv libcl.so.3.4.5 /usr/lib/libcl.so

Hi Alisha,

Thanks for the help there. While my system's CentOS, what I
did was a bit different.

Instead of moving to /usr/lib/libcl.so, I did the following:

1) in /mystic, mkdir libs
2) in cl345: mv libcl.so.3.4.5 /mystic/libs

Then it ran with CryptLib detected.

Ed

.... A program is used to turn data into error messages.

On 13 Jul 2022, Alisha Stutz said the following...
AS>
AS> sudo apt-get update
AS> sudo apt-get install build-essential
AS> sudo apt-get install gcc-9 g++-9
AS> sudo apt-get install zip unzip

Hi Alisha!! FANTASTIC catch, this setup solved 2 of my problems with my
system.. GMail password resets stopped working, SSH was spotty using 3.4.4, it
worked most of the time. BUT I followed your instructions and built 3.4.5 and
Gmail Password resets work properly now, and SSH has been solid! Thanks I
snapped a pic of your instructions and will use that in the future..

Thanks again...
Al

.... Don't diet, download a virus to remove the FAT.