Hello everybody,

Apparently there is a newer firmware for the board that is Y2k compatible:

TD 2629] PDP 11/93 & 11/94 Y2K EPROM Upgrade - BLITZ
Unique Id: 009D5E07-E6DB80A0-1C02A1
' Copyright 1999 Compaq Computer Corporation. All rights reserved
SOURCE: Compaq Computer Corporation INFORMATION BLITZ
INFORMATION BLITZ TITLE: PDP 11/93 and 11/94 Y2K EPROM UPGRADE
DATE: March 30, 1999
INFORMATION BLITZ #: TD 2629
AUTHOR: Dave Einermann
TEL#: 978-496-8509
EMAIL: einermann.dave@compaq.com
DEPARTMENT: Global Services Fulfillment - Heritage Systems
================================================================PRODUCT NAME(S) IMPACTED: PDP 11/93 and PDP 11/94 Systems
PRODUCT FAMILY(IES): PRODUCT NUMBERS:
Storage ___ ________________
Systems _X_ ________________
Networks ___ ________________
PC ___ ________________
Software ___ ________________
Other (specify) ___ ________________
PROBLEM STATEMENT:
PDP11-93/94 systems based on the KDJ11-E processor have console monitor
firmware containing a date and time function that is not Year 2000
Ready
PROBLEM SYMPTOM:
- Could not set date on Feb 29, 2000
- Year would not set beyond year 2010
- Firmware not correctly reporting date/day to O/S
SOLUTION:
Install new firmware (EPROM) that corrects all of the symptoms.
Part number for the EPROM kit is: 4A-KDJ11-XA
This kit is orderable through Logistics for contract customers.
Non-contract customers may purchase the kit through Compaq Assisted
Services and either self-install or arrange for a per-call installation
from their local Compaq Service provider.

You will not get a good grip on this spare part. Does anyone know what type of EPROM is installed - probably 27xx series and has access to the content of the EPROMS as a file, the EPROMS itself to make a copy. The data files would be enough for me, I have empty EPROMS and a programming device here.

Greetings from Mikesch

On Sat, 19 Jun 2021 12:01:54 -0700 (PDT), Michael Raab
<mr@mrsystems.de> wrote:

>Hello everybody,
>
>Apparently there is a newer firmware for the board that is Y2k compatible:
>
>TD 2629] PDP 11/93 & 11/94 Y2K EPROM Upgrade - BLITZ
>Unique Id: 009D5E07-E6DB80A0-1C02A1
>' Copyright 1999 Compaq Computer Corporation. All rights reserved
>SOURCE: Compaq Computer Corporation INFORMATION BLITZ
>INFORMATION BLITZ TITLE: PDP 11/93 and 11/94 Y2K EPROM UPGRADE
>DATE: March 30, 1999
>INFORMATION BLITZ #: TD 2629
>AUTHOR: Dave Einermann
>TEL#: 978-496-8509
>EMAIL: einermann.dave@compaq.com
>DEPARTMENT: Global Services Fulfillment - Heritage Systems
>=================================================================
>PRODUCT NAME(S) IMPACTED: PDP 11/93 and PDP 11/94 Systems
>PRODUCT FAMILY(IES): PRODUCT NUMBERS:
>Storage ___ ________________
>Systems _X_ ________________
>Networks ___ ________________
>PC ___ ________________
>Software ___ ________________
>Other (specify) ___ ________________
>PROBLEM STATEMENT:
>PDP11-93/94 systems based on the KDJ11-E processor have console monitor
>firmware containing a date and time function that is not Year 2000
>Ready
>PROBLEM SYMPTOM:
>- Could not set date on Feb 29, 2000
>- Year would not set beyond year 2010
>- Firmware not correctly reporting date/day to O/S
>SOLUTION:
>Install new firmware (EPROM) that corrects all of the symptoms.
>Part number for the EPROM kit is: 4A-KDJ11-XA
>This kit is orderable through Logistics for contract customers.
>Non-contract customers may purchase the kit through Compaq Assisted
>Services and either self-install or arrange for a per-call installation
>from their local Compaq Service provider.
>
>You will not get a good grip on this spare part. Does anyone know what type of EPROM is installed - probably 27xx series and has access to the content of the EPROMS as a file, the EPROMS itself to make a copy. The data files would be enough for me, I have empty EPROMS and a programming device here.
>
>Greetings from Mikesch

I have this firmware in my 11/93. It was dumped from a ST 27C512-type
chip dated 9905. Label said (c)DEC99 HA9908 377E7 U106 V2.01.
My own 11/93 board U106 used a 120nS NM27C512Q-120, simple swap.

Bob

> Apparently there is a newer firmware for the board that is Y2k compatible:

FWIW, mine has two roms -

TB2 U006
V2.0.08.FEB.90

and

(C) DEC 99
HA9908 377E7
U106 V2.01

Hard to tell whether I have the updates or no.

De

Dennis Boone schrieb am Dienstag, 22. Juni 2021 um 03:49:40 UTC+2:
> > Apparently there is a newer firmware for the board that is Y2k compatible:
> FWIW, mine has two roms -
>
> TB2 U006
> V2.0.08.FEB.90
>
> and
>
> (C) DEC 99
> HA9908 377E7
> U106 V2.01
>
> Hard to tell whether I have the updates or no.
>
> De
Hello De

If you can setup a date greater than 2010 you have the newest version.

I've got the files for the EPROM a 27512 and a 27128. - Got it at the PDP-11 group of Facebook

I'll check it this week - burning the EPROMS

Michael

> If you can setup a date greater than 2010 you have the newest version.

Saw Robert's note after I posted mine, and his chip has the same label
as mine. My /93 was used in a campus environmental control system after
Y2K (I imaged its drives in 2012, not _too_ long after I acquired it),
so it makes sense that it has the fixes.

De

On Mon, 21 Jun 2021 23:18:15 -0700 (PDT), Michael Raab
<mr@mrsystems.de> wrote:

>Dennis Boone schrieb am Dienstag, 22. Juni 2021 um 03:49:40 UTC+2:
>> > Apparently there is a newer firmware for the board that is Y2k compatible:
>> FWIW, mine has two roms -
>>
>> TB2 U006
>> V2.0.08.FEB.90
>>
>> and
>>
>> (C) DEC 99
>> HA9908 377E7
>> U106 V2.01
>>
>> Hard to tell whether I have the updates or no.
>>
>> De
>Hello De
>
>If you can setup a date greater than 2010 you have the newest version.
>
>
>I've got the files for the EPROM a 27512 and a 27128. - Got it at the PDP-11 group of Facebook
>
>I'll check it this week - burning the EPROMS
>
>Michael

Certainly I can set a date in the present.

On Mon, 21 Jun 2021 20:49:35 -0500, drb@ihatespam.msu.edu (Dennis
Boone) wrote:

> > Apparently there is a newer firmware for the board that is Y2k compatible:
>
>FWIW, mine has two roms -
>
> TB2 U006
> V2.0.08.FEB.90
>
>and
>
> (C) DEC 99
> HA9908 377E7
> U106 V2.01
>
>Hard to tell whether I have the updates or no.
>
>De

Yes I think so. Same labelling as mine. I don't think the U006 is
relevant to Y2K, only the U106 (certainly I haven't changed my U006).

Robert schrieb am Mittwoch, 23. Juni 2021 um 20:38:58 UTC+2:
> On Mon, 21 Jun 2021 20:49:35 -0500, d...@ihatespam.msu.edu (Dennis
> Boone) wrote:
>
> > > Apparently there is a newer firmware for the board that is Y2k compatible:
> >
> >FWIW, mine has two roms -
> >
> > TB2 U006
> > V2.0.08.FEB.90
> >
> >and
> >
> > (C) DEC 99
> > HA9908 377E7
> > U106 V2.01
> >
> >Hard to tell whether I have the updates or no.
> >
> >De
> Yes I think so. Same labelling as mine. I don't think the U006 is
> relevant to Y2K, only the U106 (certainly I haven't changed my U006).

Yes the U006 is not Y2k relevant, but there are some changes.

The old version (pre Y2k) was V2.0 - as you can see at the attached picture and V 1.06 at the 2nd EProm

After changes the EProm's version is 2.01 and booting from MSCP drives with non standard Controller address is working.

Michael

I'm sorry attaching of pictures is not possible at this group - reasons? so just use these onedrive link to see the pictures

https://1drv.ms/u/s!ArLdVirHz-IClO1iXq4RL2vvT8mS-Q?e=Gnf5ye